Tap-to-call on every screen
Your number sits at the top of every page and dials with one tap. A customer standing under a dripping ceiling will not hunt for a contact form.
Website design for electricians
A website that wins electrical jobs, day and night.
When the lights go out at midnight, nobody browses. They search for an electrician, they tap, they call. We build fast, mobile-first websites for electricians that turn that moment into your booked job, and that sell the big planned jobs just as well.
How customers choose
What really happens when the power goes out.
A breaker keeps tripping after a storm. A socket smells of burning. The homeowner pulls out their phone, searches, and opens the first three sites that look like they can help. The winner is the one where they can see a phone number in two seconds and tap to call. If your site loads slowly, hides your number, or looks like it was built in 2015, you never get the call. The job goes to whoever looked easiest to reach.
Power-out and fault work given real prominence
The urgent work gets its own space on the homepage, not a line buried halfway down a services list.
A page for every job you want
Panel upgrades, rewiring, EV charger installs, lighting, sockets and fault finding. Each one gets its own page, so customers land on the exact job they need.
The areas you cover, named plainly
Customers search for an electrician in their own area. Your site says, in plain words, that you work where they live, town by town.
Your reviews where the decision happens
Your Google reviews sit next to the call button, because a stranger's five stars are what turn a tap into a booking.
Fast on a phone, in any weather
No heavy sliders, no stock-photo carousels. The site loads in seconds on a phone, which is where almost every power-out search starts.
Photos of your real work
Customers can tell a stock photo from a real job. We build your gallery from photos of your own finished work, even phone photos, and make them look sharp on the page.
A quote form that asks the right questions
Panel age, what the fault looks like, and a photo of the panel or socket. A photo with the first message means you can judge the job before you drive out.
It keeps working while you are in a loft or under a floor
Most calls come in while you are on a job and cannot pick up. Next to the call button, your site gives customers a second way in: a simple form for the job details, or a book-a-visit slot. The enquiry waits in your inbox for when you are back on the ground.
Where we work
Built for electricians wherever you work.
Electrical work is local work, and the site is written for the places you actually cover. We build for electricians across the UK, Canada, the US and Australia, with the areas you serve named plainly on the page and the work your customers actually ask about: panel upgrades, rewiring, EV chargers, lighting, smart home and fault finding, written in the words your market uses.
United KingdomCanadaUnited StatesAustralia
Already have a trade page with us? Your electrician page links to them, and they link back, so a customer who finds either one finds the other. See our website design for roofers and website design for dentists pages.
Two kinds of customer
One site, two routes: the power-out and the planned install.
A customer with no power and a customer planning an EV charger are not the same visitor, and they should not meet the same button. One needs a phone number in two seconds. The other wants to read, compare, and send details when they are ready. A site that forces both through one contact form loses the first and rushes the second.
Route 1
The urgent route: tap and talk
No power, a burning smell, a breaker that will not stay on. The top of the page gives them one big tap-to-call button and your areas, so the call starts before they have read a paragraph. No form in the way, no menu to hunt through.
Route 2
The planned route: read, then send details
A panel upgrade, a full rewire, an EV charger before the new car arrives. These customers compare two or three firms, read the service page, and check your past work. They get a simple form for the job, the property, and a photo, and the enquiry waits in your inbox with the details attached.
One page per job
One page for each job you want more of.
A customer searching for a panel upgrade and a customer searching for an EV charger are not typing the same search, so they should not land on the same page. One long services list ranks for neither. Each job you want more of gets its own page, written in plain words, with its own headline, its own photos, and its own questions answered: panel upgrades, full or partial rewires, EV charger installation, lighting design and install, sockets and outlets, fault finding and safety checks. When the page matches the search, the customer stops comparing and starts calling.
The process
Live in 7 days. Here is how.
Same process we run for every trade, tuned for electrical work. The full breakdown is on the homepage; the short version is below.
Step 1
Free 2-minute video audit
We record a short video of what is holding your current site back and what we would change. Free, no pitch inside.
Step 2
We build your draft
We write the copy from your services and areas, build the site, and send you a live draft to click through.
Step 3
You approve, then you pay
Up to three revision rounds. You do not pay the flat fee until you love the draft. Then it goes live.
One flat fee. No surprises.
A complete rebuild for $499, shown in dollars on the pricing page. No hourly billing, no surprise invoices. See the full pricing and what the care plan covers.
Straight answers
Asked by electricians, answered straight.
How much does an electrician website cost?
One flat fee: $499, shown in dollars on our pricing page. No hourly billing, no surprise invoices, and you do not pay until you love the draft.
How long until my electrician website is live?
Seven days from the day we start. You review the draft, we do up to three revision rounds, and it goes live when you are happy.
Do I have to write any of the content myself?
No. We write the copy from your services, your materials, and the areas you cover. You read it over and tell us where it does not sound like you.
Will the site work for power-out emergencies?
That is the point. Your phone number is tap-to-call on every screen, and power-out and fault work is given real prominence instead of being buried in a services list.
Do you really build before I pay?
Yes. You approve the draft first. If you do not love it, you do not pay. That is the whole arrangement.
Can you use photos of my actual jobs?
That is the preference. Real photos of your finished work build trust faster than any sales copy. Send phone photos of recent jobs and we will make them look sharp on the page.
Should every service I offer get its own page?
The jobs you want more of, yes. A panel upgrade page, a rewiring page, and an EV charger page each match the exact search a customer typed, so Google has something clear to show and the customer finds their answer in seconds. A single services list ranks for none of them, and it makes every visitor dig for what they need.
Can customers send photos of their electrical problem?
Yes. Your enquiry form can ask for the panel age, where the fault shows, and a photo of it. A photo with the first message means you can judge the job before you drive out, and the customer feels heard from the start.
I miss calls when I am in a loft or under a floor. Can my website help?
Yes. A missed call usually becomes someone else's job. Your site gives the customer a second way in: a simple form for the job details, or a book-a-visit option. The enquiry lands in your inbox with the details, waiting for when you are back on the ground.
I take emergency callouts and planned installs. Does one site serve both?
Yes, but only if the two routes stay separate. Power-out and fault work get the tap-to-call button first, planned installs get the service page and the quote form. One button for both means the power-out caller fills in a form while the house sits dark, and the EV charger customer gets rushed into a call they did not want.
Find out what your website is costing you.
Send us your current site and we will record a free 2-minute video audit: what is holding it back and exactly what we would change.
Get a free site auditPrefer reading first? How to get your business found on Google.